Tips From the Moving Business Pros: The Best Ways To Move a Pinball Machine



With pinball making a huge revival throughout the country, Gentle Giant desires to make sure that these classic, stunning makers stay damage-free while being transferred. Oh, and we desire the people moving them to be safe, too.

At first look, pinball makers can appear intimidating to move since of their size, weight, and fragility. Fortunately, our proficient Giants have a few tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

Most of modern pinballs (made in the last 20 years or two) have a hinge system which permits the headbox to be folded down. Early pinball machines had their headboxes bolted on, using either 2 or 4 bolts. All Electro-Mechanical pinballs utilize this system, along with the early Solid State makers.

Later on machines have hinges and use a locking system to keep the headbox upright. There might also be two bolts inside as added security, in case the lock is broken or accidentally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball devices, you have to get rid of the headbox rear gain access to panel to get to the bolts and plugs inside. Normally this panel has a lock on it to keep it in location, but in time the key might have been lost. Frequently, there is a screw keeping this panel in place.

When within, get rid of the bolts and disconnect the large ports that have circuitry decreasing into the machine. You may want to identify these adapters to put them back in the ideal spot, but they ought to be various sizes, making it hard to plug back improperly.

You can now remove the headbox completely, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in place.
Early Solid State Pinballs

For early Solid State Pinballs, you will require to get rid of the back glass. There is a lock situated on the headbox in one of 3 areas: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.

Once unlocked, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.

Then, open the back box lamp panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out to you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to lift up the lamp panel in order to swing it open.

Now that you are within, you can get rid of the bolts, and any plugs that have wires decreasing into the maker. You may wish to label these plugs to put them back in the best spot. You might not have to get rid of the plugs, as the circuitry needs to be long enough to allow the headbox to be folded down.

At this point, you can lock up the lamp panel and replace the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the provided secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the machine. This is a simple setup and requires no tools.

If you can now fold down the head box onto the cabinet, you're done. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.

If you can not fold the head box down, then you have to get in. There is a lock located at the top of the back glass in the center. moving heavy items Use the provided secret to unlock, and eliminate the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will require to get rid of the display screen panel. You can do this by raising it up and out. Open the lamp panel. There will be a latch located on either the right-hand or left-hand side. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Eliminate the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Eliminating the Legs.

Pinball Device legs are held in place by eight bolts. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into.

These captive nuts and threaded plates can be damaged, and the use of extra nuts may have been needed. If this holds true, navigate here you will have to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Move out the playfield glass, and put in a safe place. Next, raise the playfield by putting your hand where the ball drains, and lift the playfield up.

You should now have access to any nuts that may have been used. Once any nuts have actually been gotten rid of, change the playfield glass and lock down bar, and lock the front door.

Make certain to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to fit.
Packing the Pinball.

You are now prepared to transfer your pinball machine. Before you load it, make sure you get rid of the pinballs so they do not bounce around throughout transportation.

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to loading the machine. Get a good friend to have and help one of you supporting the pinball, while the other eliminates the front legs.

Make sure you strap the pinball in, as you do not want it moving if you need to stop unexpectedly!

For Electro-Mechanical pinball devices, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it might be much easier to eliminate the legs just prior to loading the machine. Get a good friend to assist and have one of you supporting the pinball, while the other removes the front legs.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Tips From the Moving Business Pros: The Best Ways To Move a Pinball Machine”

Leave a Reply

Gravatar